If you are using Windows as your daily driver and work then chances are you have faced USB Device Not Recognized – Device Descriptor Request Failed issue occasionally. When you insert your USB drive into PC, it shows an error. If you try to solve this issue from the device manager, you will realize that your device is labeled as Unknown USB Device (Device Descriptor Request Failed).
This error can arise due to several reasons and based on these reasons; there are a variety of solutions to fix this issue. You can try below solutions and try to fix them so that you don’t need to waste too much quantity of time.
Sometimes as a result of virus problems, you may face a USB Device Not Recognized problem with your USB Drive. There are lots of possible solutions to resolve this error.
Fix device descriptor request failed in Windows
The methods listed below are organized sequentially, from simple reasons to tougher reasons for the mistake. A few of the methods are very easy because the cause for this error may also be very straightforward.
So do follow the sequence if you would like to save time. Device Descriptor Request Failed is a common windows error when you attempt to add USB on your PC and laptops.
Here we are listing some reason why this error occurred:
- Outdated drivers.
- Use corrupt USB controllers.
Fix 1 – By removing the power supply
- If you see this error on your Windows Laptop or PC, first shut down your system and then remove all power supply.
- Wait for some time and then again start the system.
Fix 2 – By Disabling Fast Start-up
If restarting and removing power supply doesn’t work for you then try this solution. Microsoft has implemented Fast Startup option in Windows 10. Fast startup is using two processes named hibernate and shut down and it allows users to boot very fast. You can disable fast startup option by following steps:
Step1. Open Control Panel > Power Options.
Step 2: In the left side, find Choose what the power buttons do > Click on it.
Step 3: Now click on Change settings that are currently unavailable.
Step 4: Now uncheck the box of Turn on fast startup.
Step 5: Click on the Save button.
Step 6: Restart your system.
- Also Read: Fix DPC Watchdog Violation Error
Fix 3 – By changing USB Selective Suspend Settings
Step 1: Click on the Battery icon from the taskbar system tray.
Step 2: Choose Power Options.
Step 3: Change Plan Setting.
Step 4: Select Change advanced power settings option.
Step 5: Find USB settings from the list and expand it.
Step 6: Click on USB selective suspend settings to expand it > Click On battery options > Select Disabled.
Step 7: Do the same with plugged in option > Apply > Click Ok.
- Also Read: Fix Windows Update Stuck Issues
Fx 4 – By uninstalling all the Unknown USB Drivers
- Open Run and type “devmgmt.msc” > click ok.
- Click on Universal Serial Bus controllers > Expand it.
- Attach your device if not connected. From the Universal serial bus controller list, find an unknown USB device (Port reset failed) option with a yellow sign.
- Now right-click on it > Uninstall option.
- After the uninstall, restart the system.
Fix 5 – By Updating Generic USB Hub
Step 1: Open the Device Manager or open Run > type devmgmt.msc > ok.
Step 2: Find Universal Serial Bus controllers> right-click on Generic USB Hub option > Update Driver Software option.
Step 3: Select Browse my computer > click on Let me pick from a list of drivers on my computer option.
Step 4: After that select Generic USB hub > click on Next.
Step 5: Click close.
Fix 6 – By using Troubleshooter
To use Troubleshooter, follow the below steps:
Step 1: Open Control panel and find Troubleshooter from the search bar.
Step 2: Go to Hardware and Sound and select configure a device option.
Step 3: Now Fix USB Device Not Recognized. After the troubleshooting process complete, it will list down all the errors.
Thanks for reading!!