192.168.1.1 Login Page, Username, Password, and Wireless settings

The IP address is used for verities of reasons. Mainly the IP address is necessary to log in to the router, username and password are also necessary with the IP address for login to the router. The IP address 192.168.1.1 is a Private IP address and this is used in the Linksys router. Different networking devices use different private IP addresses. However, the public IP address is used on the website. The IP address 192.168.1.1 Login is a default IP address for the Linksys routers. If this is the new device, then the default IP address should be the same but if the device is not new then the IP address can be different. Press the reset button to reset all of the settings.

These 192.168.1.1 or 192.168.0.1 addresses are commonly called host addresses.

To set up anything in the router, you need to log in to the router and use the IP address 192.168.1.1 on the browser adders field and click on the Go button from the browser. Now the login screen page will appear and there you need to use the default username and password. You will get those login detail in the router box. Check the router’s backside to know the IP address, username, and password. You may get those detail on a paper sheet.

Default Username & Password for routers

You can customize Router Settings using Router Admin Page. You can also change Router Login IP from Network Settings.

Note that the default username and password for general 192.168.1.1 routers are:

  • Username: admin
  • Password: admin

Or

  • Username: admin
  • Password: password

If you want to set up a new Router or configure your Network, then you will need a Router IP Address so that you can access it and log in to your Router to change settings. Now how to find a Router IP address to log in. Here are some default IP addresses 192.168.0.1, 10.0.0.0.1 or 192.168.2.1. Check the below links to find more Router IP addresses.

How to Change 192.16811 Router Password

If you want to change Router Password then you can. All you need to do is, access the Router admin page > go to advanced settings > Router Admin > Change Password > Enter Old and New Password and save. Done!

You can log in to your Router with their default IP address but note that each Router has its Default IP address. So here we are going to share a list of all the 192.168.1. Router IP address and default username and password.

Router IP address, Default Username, and Password:

Router ManufacturerIP addressUser NamePassword
TP-Link192.168.1.1
192.168.1.254
adminadmin/password
Cisco192.168.1.1adminadmin
D-link192.168.1.1
192.168.1.254
adminadmin
Linksys192.168.1.1
192.168.1.10
192.168.1.254
192.168.2.1
adminadmin
Netgear192.168.1.1adminadmin
Netgear192.168.1.1adminpassword
Asus192.168.1.1
192.168.2.1
10.10.1.1
adminadmin
Belkin192.168.1.1
192.168.2.1
10.0.0.2
10.1.1.1
(none)MiniAP
Billion192.168.1.254adminadmin

How to Access the Cisco Router using 192.168.1.1

Step 1: Connect your Cisco Router to the PC using an RJ45 cable.

Step 2: Turn on the Router and PC.

Step 3: Open Browser and type 192.168.1.1 and press Enter.

Step 4: Enter Default username and password (admin-admin) if you haven’t changed. Or Enter your username and password.

Step 5: This will open the Cisco Router Admin Page. Now you can customize all your settings and also change WiFi password.

Also Read: Linksys Router Login and Modem Issues

192.168.1.1 IP address is a number assigned to each device in a network allow you to communicate with the devices. The private IP address ranges from 192.168.0.1 to 192.168.1.255.

D-link Router Login

Step 1: Plug D-Link router with your laptop or desktop with Ethernet cable.

Step 2: Turn on your computer.

Step 3: Open Web browser. Type http://192.168.1.1 or http://dlinkrouter > Enter.

Step 4: Log in to the D-Link router with the administrator username and password.

Step 5: If you are login in for the first time then click on Setup and then go to wireless settings. You can set up it manually or automatically.

How to Log In to a Netgear Router

Step 1: First of all, connect the Netgear router with your Windows PC and then open Browser and type 192.168.1.1 > Enter.

Step 2: Enter the Router’s default username and password. If you don’t know the default username-password then check our above table. Go to Wireless Settings and customize settings.

TP-LINK Router, Login & IP

Step 1: TP-LINK Router has an IP address 192.168.1.1. Connect Router and PC with the RJ45 cable.

Step 2: Type 192.168.1.1 in browser > Enter.

Step 3: Enter the username and password.

  • IP address: 192.168.1.1 (or http://tplinkwifi.net)
  • Username: admin
  • Password: admin/password
TPlink Router Login

Step 4: Go to Wireless Setting and change the settings that you want.

If you are facing an issue while connecting Router and accessing the 192.168.1.1 admin page, then you may have done something wrong. These are some possible mistakes.

  • The IP address is configured improperly.
  • The Incorrect IP address is used in the browser or wrong settings are set up.
  • The router may not reply for the damaged connection with the modem
  • The wrong proxy is installed in the browser. Now reconfigure the proxy properly.
  • The wrong or faulty formed IP address is used like 192.168.I.I instead of 192.168.1.1.
  • The IP address is used as link www.192.168.1.1

Read the manual to know about the Wi-Fi and router settings. You can contact the manufacturer’s site to know about the settings, or you can ask for help from the router manufacturer. This is a very fast and easy process to know everything about the routers and Wi-Fi settings.

How to Connect Two Routers having the same IP Address

Step 1: Connet one of the Router with a PC using LAN cable and then go to https://192.168.0.1 or www.192.168.1.1 address > Enter username and password > Access Admin page.

Step 2: Go to Network or LAN Setup and change the IP address to 192.168.2.1 and save.

In my case, i am using NetGear Router, then go to Advanced > Setup > LAN Setup an IP address > change IP and Apply.

Step 3: Now Connect both the Router with LAN cable and you will see they are working fine.

Some new Routers have auto setup mode. They allow users to configure it but if the user doesn’t want to Setup a new Router then they automatically setup it for the user. They find Default Router Login IP address and Password for you.

If you are still facing issues while accessing 192.168.1.1 admin Login page, then comment below.

29 comments
  1. trying logging in 192.168.1.1 but it says your connection to this site is not private/secure. i am giving username and password on authentication required and its coming on same page.

    1. Seems like your Browser detect it as a harmful url. Try to open it in incognito mode. Also try to reset your Router. Comment your feedback.

  2. Greetings!Verry useful advice in this patticular post!
    It is the little changes which will mmake the largest changes.
    Thanks for sharing!

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Post
Sites like craiglist

Top 10 Best Sites Like Craigslist : Craigslist Alternative Websites

Next Post
Best Xposed Modules For Android

30 Best Xposed Modules For Android

Related Posts