Are you interested in knowing what 10.0.0.2 is? The chances are that if you do not have much background in network settings, you think it is just a random assortment of numbers. The truth couldn’t be further from this. 10.0.0.2, is in fact, a private and default IP address that router and modem manufacturers use to secure their networks and give access to users. Famous router brands such as Micronet, Edimax and even Siemens use this as their private IP address. Such an Ip address is needed because it makes it secure for the router users to access their admin page. Users can manage their network settings from this admin page without fearing an intrusion or privacy attack. Manufacturers use several IP addresses to provide their clients with a simple tool to manage and edit their wireless and LAN network settings. A subnet acts like a subsystem or subdivision of an IP network and hence, starting it from 10.0.0.2 prevents network conflict and makes it easier to communicate within the network.
Things you Can Change Using 10.0.0.2
The configuration or admin page allows you to access several networking settings of your router. Tinker around here and you can change almost anything related to your modem or router. Here’s a look at some of the important things you can change using 10.0.0.2.
- Lan Configuration
- WAN and WLAN set-up
- DSL/DHCP/PPOE Verification and Configuration
- Creating Dial-Up Connections
- Upgrading security settings
- MAC and WPS settings
- Changing your DNS Settings
- IP Qos and Proxy settings
- Change router credentials
- Change WiFi password
- Evade IP QoS overload
- Set bandwidth for your devices
How to login 10.0.0.2 Telkom/D-Link Router
- Connect your router to your device.
- This may be done either by using an Ethernet cable or through a wireless network set-up.
- A wired connection would be a better choice because then there would be fewer chances of the connection falling. Problems usually arise when the connection gets logged out when you try to click Save, and this hampers any of the changes you have made.
- If possible, always try to go for a cable connection as this is more secure. Wireless networks should always be your last resort.
- Turn both your device and the router on.
- Open your preferred browser.
- On the address bar, enter https://10.0.0.2 and press enter.
- If by some chance, that IP address does not work, you can also try either https:\\192.168.100.1 or https:\\10.1.10.1
- Once you reach the login page, enter your login credentials.
- Once you are in the admin page, make the changes as you deem necessary.
- Click ‘Save‘ before you exit to apply the changes you have made.
Some brands do not require any login credentials, but rather take you directly to the admin page if you successfully input the right default IP address.
Also Read: ASUS Router Login – Setup and Configuration Guide
10.0.0.2 Default Username and Passwords
Most routers have default login credentials which the users can use to access the admin page. Usually, this will be printed behind the router but some manufacturers post this info in a data-sheet that they provide users along with the router. You have several ways to check for the default credentials. First and foremost, check your router’s back and see if you can find any credentials. If not, Google your router manufacturer’s name + default login and you should get websites that will be listing them out. Here, we take a look at some of the most common combinations used by Telkom and D-Link. Input and try these out if you aren’t able to find anything on the internet. But make sure you change the default credentials soon for security purposes.
- admin/modem
- admin/epicrouter
- admin/password
- admin/admin
How to Reset Telkom Router
If you don’t remember the password you set by changing the default credentials, the next course of action would be to reset the router and get it back to the original factory settings. Just press and hold the reset button for over at least 10 seconds. This will result in the router LED lights starting to blink as this indicates that the router is resetting. After resetting the router, you can carry on and use the default login credentials of your router model to access the admin panel. From there, you can set a new username and password for yourself.
Forgot Password- Telkom
All of us are humans and some of us are more forgetful than the others. People forgetting their password is a common problem that most router manufacturers have to deal with. If you use a Telkom router and have forgotten your password, there are two things you can do: you can either change your default login credentials, or you can reset your router as explained above. Here’s what you need to do to change your default credentials.
- Choose your preferred browser.
- Into the address bar, enter the address http://10.0.0.2 and click enter
- On the admin page, input your default credentials.
- For a Telkom router, the default values usually are: blank/admin
- Once you are into the admin page, set a new password to increase security.
- Go for a little tougher password; preferably something alphanumeric.
- Note this down in case you are prone to forgetting things.
- As this gives access to your network settings, make sure you don’t give this away to any stranger.
- Also, take some time to change your SSID number into something unique and distinguishable.
- Try enabling WPA2-PSK encryption to amp up your security level.
Troubleshoot 10.0.0.2 Router Login Loading
- Sometimes the page doesn’t load, in that case, try using a second default IP address such as 192.168.0.1, 0.30, 0.50, 1.1 or 10.1.1.1.
- If the network issue persists, then recheck whether your cables are all plugged in.
- Verify if your device is actively connected to the internet.
- Another thing you could try is restarting your device. If that doesn’t work either, then switch your router off and then wait for a minute before you turn it back on. Try again after doing this.
- If all of this fails, then reset the router and start afresh.
- Double-check your IP address; remove unnecessary 0s or 1s.
- Type ipconfig onto Command Prompt if you have a doubt regarding what your default IP address is.
There are multiple types of router brands available, you can use 10.0.0.2 for only specific routers such as Telkom and others as mentioned above. If it won’t work then you should try 10.0.0.2 or 192.168.0.1 since those are the private IP address.
